Modular UPS PLRM SERIES
Overview
The PLRM Series is a scalable, redundant modular UPS system designed for high-density data centers and critical applications. It features True Online Double Conversion, advanced DSP control, and a modular architecture that scales power and runtime as needed. With N+X parallel redundancy, it ensures clean, uninterrupted power, protecting sensitive devices from network issues.
PLRM Series is a scalable, redundant Modular UPS system designed to cost-effectively provide high level availability for high-density data centers and critical applications. True Online Double Conversion and advanced DSP control technology. Modular Architecture can scale power and runtime as demand grows or as higher levels of availability are required. Combines the modular design with the N+X parallel redundancy technology. As a result, all unwanted situations that may occur in the network are filtered by the online UPS, and your sensitive devices are fed with clean energy.
Key features
- Redundant parallel operation
- Potential free output voltage
- Full redundant control architecture
- Very fast dynamic response time
- Output short circuit proof
- Wide range of ratings with IP protection up to 56 as standard
- Low voltage ripple to prolong battery life time
- Intelligent battery charge and monitoring control
- Lithium Ion Battery charging options ready and available
- IGBT rectifier at the core of the best-in-class reliability
- Modular Compact Cabinet Design contains maximum 6 slots
- <3% THDI
- Smart access to UPS data via a large color touchscreen with 2000-event exportable log
- Modular design, up to 3 units in parallel online hot-swappable N+X redundancy
- Excellent performance on non-linear loads (computer and switching power supplies)
- Input and output 50hz, 60hz, frequency optional
- Intelligent power module based on IGBT technology full reliability
- DSP (digital signal processor) control
- Low output distortion factor
- High efficiency
- Audible alarm
- User-friendly control panel
- Modular design with swappable power module
Technical specifications
| Input – AC voltage (Single phase) | 100 KVA/Kw |
|---|---|
| Input – AC voltage (Three phase) | 380/400/415 V |
| Input – Voltage tolerance | 323~478Vac |
| Input – Power Factor | 0.99 |
| Input – Frequency | 50 Hz (60 Hz) |
| Input – Frequency tolerance | 40Hz～70Hz |
| Input – Efficiency | 99% |
| Input – Total harmonic distortion (THD) | <3% |
| Input – Inrush current | ≤ 10 x In |
| Input – Float Voltage | 2.17-2.27 V/cell VRLA | 1.4-1.42 V/cell Ni Cd |
| Input – Ripple | <1% |
| Output – Inverter Bridge Topology | IGBT with output isolation Transformer |
| Output – AC Voltage | 380/400/415VAC |
| Output – AC Voltage Tolerance | 1% |
| Output – Frequency | 50 Hz (60 Hz) |
| Output – Frequency Tolerance | +/- 0.1 % |
| Output – Inverter overload capability (1 minute) | <150% |
| Output – Inverter overload capability (10 minute) | <125% |
| Output – Inverter overload capability (1 Hour) | <110% |
| Output – Harmonic voltage distortion (100% linear load) | < 3 % |
| Output – Harmonic voltage distortion (100% non-linear load) | < 5 % |
| Output – Power Factor | 0.97 |
| Output – Static Transfer Switch | SCR Type |
| Output – Static Bypass transfer Time | <4 ms |
| Battery – Type | Lead acid or nickel cadmium, Li ion |
| Battery – Autonomy | From few minutes to several hours, on request |
| Battery – Battery Voltage | ± 240VDC |
| Battery – Charge Power | Up to 15 % from System Power |
| Standards | IEC62040-1:2017, IEC62040-2:2016, IEC62040-3:2011, IEC60529:1989 +AMD1:1999 |
Applications
- Oil and Gas
- Power Plants
- Data center
- Mining Industry
- Transport